Underfloor Heating (UFH) and Screeding
Underfloor heating (UFH) is the fashionable preference to use in your domestic and commercial premises, as it provides seamless heating without the need for radiators. We have extensive experience of providing screeding for your underfloor heating system. Below are some examples of our screeding for underfloor heating, based in London and South East England.
Wet Underfloor Heating with Compacted PP Fibre Screed in Virginia Water, Surrey
Location: Virginia Water, Surrey
Quantity: 420 square meters. 2 houses - 210 square meters each for the ground and first floors.
Product: 75mm Celotex insulation, wet underfloor heating, 25mm Kingspan perimeter strip, 65mm of compacted traditional sand and cement screed incorporating PP fibre reinforcement.
Comments: Our screeders ensured that the screed was well compacted around the pipe work so that there were no hollows, which helps the heat to travel seamlessly.
Electrical Underfloor Heating and PP Fibre Screed in Rotherhide
Location:Rotherhide
Quantity: 1200 square meters. 4 floor levels with 13 flats
Product: Ground floor: 1200 gauge damp proof membrane, 75mm Kingspan insulation, 500 gauge polythene, 25mm perimeter strip, 75mm traditional sand and cement screed incorporating PP fibre reinforcement. First floor: 75mm Kingspan insulation, electrical underfloor heating, 25mm perimeter strip, 75mm traditional sand and cement screed incorporating PP fibre reinforcement.
Comments: A complicated project as the screeders had to screed with the stud work in place. Thicker screed depths retain the heat more effectively than thinner depths which means the system is more energy efficient.
Electrical UFH Underfloor Heating and Fibre Screed in Virginia Water, Surrey
This screeding contract required 60mm traditional fibre screed laid on top of underfloor heating (UFH) for 9 houses in Virginia Water in Surrey, UK.
Location: Virginia Water, Surrey
Quantity: 430 meters squared. Ground floor for 9 houses.
Product: Insulation and underfloor heating provided by client. 60mm of traditional sand and cement screed incorporating PP fibres and perimeter edging strip.
Comments: Lots of UFH manufacturers and suppliers recommend a screed depth of 60mm to use with their systems. This is also the standard depth for traditional sand and cement screed.
Underfloor Heating with Fibre Screed in Wimbledon, London
Location:Wimbledon, LondonQuantity: 650 square meters
Products: Some areas had a polymer bonded base followed by 75mm fibre screed. Other areas had 1200g damp proof membrane, 75mm insulation, underfloor heating and 75mm screed with PP fibres.
Comments: UFH is an acronym for Underfloor heating. This project involved underfloor heating with screed.
